FANUC配套软件之CNC设定工具介绍

一、CNC 设置工具光盘介绍

CNC 设置工具光盘包含两个工具,CNC 设置工具和PROFINET 配置工具。
此外,以下四个工具集成到 CNC 设置工具中。
– CNC 参数设定工具
– EtherNet/IP 设置工具
– FL-net 设置工具
– PROFIBUS 设置工具
CNC 设置工具和 PROFINET 配置工具是独立的工具。每个工具都使用另一个安装程序和序列号。

CNC设定工具的光盘订货号为:A08B-9510-J540

PROFINET 配置工具包括 V3.2.11 和 V3.1.10在光盘中。 文件夹是“PROFINET_Configuration_Tool_V3.2.11”和
“PROFINET_Configuration_Tool_V3.1.10”。请参阅文档以正确使用每个版本。文档 A-40920E.pdf 位于文件夹“AdditionalFiles”下每个版本的文件夹。

GSDML 文件“GSDML-V2.3-FANUC-CNC-20150713.xml”放置在此 CD-ROM 的“PROFINET_GSDML”文件夹是 PROFINET IO 的 GSDML 文件
FANUC CNC的设备功能。使用 FANUC CNC 的 PROFINET IO 设备功能时,请安装将此 GSDML 文件添加到 PROFINET 配置工具。

CNC设定工具

 

 

PROFINET相关参考文章:

  1. FANUC profinet软件PROFINET_Configuration_Tool_V3.2.16安装与下载地址

  2. FANUC PROFINET IO Device 设定步骤说明

二、CNC 设置工具可以在PC哪些系统上安装?

CNC Setting Tool supports the following OS.
– Windows XP Professional SP2 or later (32bit)
– Windows Vista Bisuness
– Windows 7 Professional (32bit/64bit)
– Windows 8 Pro (32bit/64bit)
– Windows 8.1 Pro (32bit/64bit)
– Windows 10 Pro (32bit/64bit)

PROFINET Configuration Tool supports the following OS.
– Windows XP Professional SP2 or later (32bit)
– Windows 7 Professional (32bit/64bit)
– Windows 8 Pro (32bit/64bit)
– Windows 8.1 Pro (32bit/64bit)
– Windows 10 Pro (32bit/64bit)

Display : 1024×768 or higher resolution
Vacant capacity of hard disk requirements during installation :
– CNC Parameter Setting Tool: 1.3GBytes or more
– EtherNet/IP Setting Tool: 100MBytes or more
– FL-net Setting Tool: 100MBytes or more
– PROFIBUS Setting Tool: 100MBytes or more
– PROFINET Configuration Tool:100MBytes or more

三、CNC 设置工具支持哪些数控系统

— CNC Parameter Setting Tool —

CNC Parameter Setting Tool supports the following CNC.
– FANUC Series 30i-MODEL A/B
– FANUC Series 31i-MODEL A/B5
– FANUC Series 31i-MODEL A/B
– FANUC Series 32i-MODEL A/B
– FANUC Series 35i-MODEL B
– FANUC Series 0i/0i Mate-MODEL D
– FANUC Power Motion i-MODEL A

To transfer parameters between this tool and the CNC via Ethernet, the CNC
must include an embedded Ethernet function or an Ethernet board that
supports FOCAS2/Ethernet.

— EtherNet/IP Setting Tool —

EtherNet/IP Setting Tool supports the following CNC.
– FANUC Series 30i-MODEL B
– FANUC Series 31i-MODEL B/B5
– FANUC Series 32i-MODEL B
– FANUC Series 35i-MODEL B
– FANUC Series 0i-MODEL F
– FANUC Power Motion i-MODEL A

To transfer parameters between this tool and the CNC via Ethernet, the CNC
must include an embedded Ethernet function or an Ethernet board that
supports FOCAS2/Ethernet.

— PROFIBUS Setting Tool —

The System/Version of the CNC’s FL-net function and the Ethernet function
that corresponds to FL-net Setting Tool is as follows.

CNC 30i/31i/32i-B Fast Ethernet 658K/02 or later
Embedded Ethernet:CNC system All Series/05 or later

35i-B Fast Ethernet 658K/02 or later
Embedded Ethernet:CNC system All Series/02 or later

Power Motion i-A
Fast Ethernet 658K/02 or later
Embedded Ethernet:CNC system All Series/01 or later

0i-F Fast Ethernet 658B/02 or later
Embedded Ethernet:CNC system All Series/01 or later

FL-net Ethernet
Function Function
CNC 30i/31i/32i-A 656K/01 656E/11 (Embedded Ethernet) or later
6569/21 (Fast Ethernet Board) or later
656U/02 (Fl-net/Ethernet coexisting) or later

0i-D 6584/01 658E/01 (Embedded Ethernet) or later
658W/01 (Fast Ethernet Board) or later

16i/18i/21i-B 656C/01 656A/15 (Embedded Ethernet) or later
656G/01 6567/19 (Fast Ethernet Board) or later
656T/01 656T/01 (Fl-net/Ethernet coexisting) or later

16i/18i/21i-A 656C/01 6567/19 (Fast Ethernet Board) or later
Power Mate i-D/H

When no data is exchanged with 30i/31i/32i-A/B, 35i-B, PMi-A via Ethernet,
no Series/Version restriction is imposed on the Ethernet function.

— PROFIBUS Setting Tool —

PROFIBUS Setting Tool supportes the following CNC.
– FANUC Series 30i/31i/32i -MODEL A/B
– FANUC Series 35i -MODEL B
– FANUC Power Motion i -MODEL A
– FANUC Series 16i/18i/21i -MODEL A/B
– FANUC Series 0i -MODEL B/C/D/F
– FANUC Power Mate i -MODEL H/D

To transfer parameters between this tool and the CNC via Ethernet, the CNC
must include an embedded Ethernet function or an Ethernet board that
supports FOCAS1 or FOCAS2/Ethernet.

— PROFIBUS Configuration Tool —

The System/Version of the CNC’s PROFINET function and Embedded Ethernet
function that corresponds to PROFINET Configuration Tool is as follows.
30i/31i/32i/35i-B, Power Motion i-A
PROFINET function: 658R/02 or later
Embedded Ethernet function: 658M/15 or later

0i-F
PROFINET function: 658U/02 or later
Embedded Ethernet function: 658A/05 or later

 

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源